Burkert pH electrode model 8203 (00418319)

We are an authorized distributor of Burkert pH electrodes, model 8203

• , Ceratrode pH 1200 ID.Nr..418319. pH: 0.. 14, T: 0...130°C, p: 0... 16 bar. LEHIY Industrial is an authorized distributor of German Burkert pH/REDOX electrodes, type 8203 / product number 418319. Technical attributes: Analysis | 0.00 °C - 130.00 °C | Glass type 8203 - Burkert pH electrodes and Burkert O.RP probes. Description: Burkert pH or redox potential meters are modular measuring devices used to measure: - the pH in clean, contaminated liquids or liquids containing small amounts of solids, sulfides, or proteins. - redox potential: - in clean, contaminated liquids or liquids containing small amounts of solids, sulfides, or proteins, which have low conductivity. The Burkert 8203 probe is available in several different versions: For pH measurement: - PLASTRODE pH 120 mm - FLATRODE pH 120 mm - LOGOTRODE pH 120 mm - UNITRODE PLUS pH 120 mm - CERATRODE pH 120 mm - FERMTRODE VP pH 120 mm;
• For ORP: - FLATRODE ORP 120 mm - LOGOTRODE ORP 120 mm - UNITRODE PLUS ORP 120 mm. Features of the Burkert 8203 probe: Suitable for many different types of installations and applications. Multiple Burkert probes are available with various supports suitable for DN15 - DN200 pipes. The 8203 pH electrode is compatible with the following products: Type 8200 (accessories for Burkert analytical probes);
• Type 8202 (pH or redox Burkert potentiometric transmitters, ELEMENT...);
• Type 8619 multiCELL... Burkert multifunction transmitter. The working principle of the Burkert pH electrode: The Burkert pH/ORP electrode, also known as a pH/ORP sensor or pH/ORP probe, is used with a pH/ORP transmitter to form a pH/ORP measurement system. The effectiveness of a Burkert pH meter largely depends on electrode maintenance. The electrode should be frequently cleaned to ensure it is not contaminated;
• The electrode should be calibrated periodically;
• During water outages, the electrode should be immersed in the solution being measured, otherwise its lifespan will be shortened;
• The cable connector must be kept clean and protected from moisture or water ingress. Burkert pH electrode installation precautions:
• The electrode cable connector must be kept clean and protected from moisture or water ingress, otherwise the measurement value will be significantly inaccurate, and the instrument may not even function properly.
• The electrodes should be cleaned frequently to ensure they are not contaminated.
• The electrodes should be recalibrated periodically, with the specific interval depending on the local medium.
• During non-operational periods, if the electrode membrane cannot be immersed in the measured solution or water, the electrode should be removed and immersed in a 1 mol KCl solution. Do not allow the electrode membrane to dry out, as this will shorten its lifespan.
• Before using the electrode, if the electrode membrane is dry, it should be soaked in a 3 mol KCl solution for a period of time, generally at least 24 hours.
• The electrode membrane is a very thin layer of special glass. Exercise extreme care during installation, calibration, and cleaning to avoid damaging the membrane.
• Do not install the sensor cable in the same terminal as the AC or DC power cord. Excessively long cables should not be coiled and placed near motors or other equipment, as this may generate electromagnetic fields. During installation, trim excess cable to ensure an appropriate length, thus avoiding unwanted induced signals (“electrical noise” may interfere with the sensor signal). commonly used), 560377, 560378, 560379, 561025, 561027, 552041, 418319.

Share Article