Burkert 2000 angle seat valve

Burkert 2000 series angle seat valves are distributed in Shanghai. These are pneumatic angle seat valves, available in both gas and liquid configurations. The valve body is made of either gunmetal or stainless steel.

The actuators are available in single-acting and double-acting versions (double-acting models are for nitrogen generators; for customized products, contact LEHIY Industrial for genuine products and after-sales service).

The Burkert 2000 series angle seat valve is described as an externally controlled valve consisting of a pneumatic piston actuator and a two-way valve body.

Depending on the ambient temperature, actuators made of two different materials (PA and PPS) are available. A proven, self-adjusting spindle seal ensures high sealing performance. The flow-friendly two-position two-way valve body, constructed of red copper or precision-cast stainless steel, enables high flow rates.

Various accessories can be added to this maintenance-free, robust valve for position display, travel limiters, or manual emergency operation.

2000 Burkert Angle Seat Valve, Welded Type DN15 001392 2000 Burkert Angle Seat Valve, Welded Type DN20 001393 Welded Burkert Angle Seat Valve, Burkert Stainless Steel Angle Seat Valve 001394 2000 Burkert Angle Seat Valve, Welded Type DN32 001395 Welded Burkert Angle Seat Valve, Welded Type DN40 Burkert Stainless Steel.

Angle Seat Valve 001396 Welded Burkert Angle Seat Valve, Welded Type DN50 Burkert Stainless Steel Angle Seat Valve 001397 Burkert Angle Seat Valve 00001252 Burkert 2000 Type Burkert angle seat valve 001136, Burkert stainless steel angle seat valve 00001137, Burkert angle seat valve 001593, Burkert 2000 type pneumatic valve, Burkert.

angle seat valve stock, direct shipping.

Burkert 2000 type angle seat valve introduction: Burkert angle seat valves maintain flow rate while saving space. It is a guided angle seat operated valve by a single-acting pneumatic actuator with spring safety protection. When using, normally open or normally closed should be selected.

Burkert angle seat valves are widely used for frequent short-time starts, featuring sensitive response and accurate action. When used with solenoid valves, pneumatic control can accurately control gas and liquid flow. It can achieve accurate temperature control, liquid dripping, and other requirements.

Angle seat valves are used in moist heat sterilizers to control steam volume and accurately control temperature. The principle and technical parameters of Burkert angle seat valves: Burkert angle seat valves maintain flow rate while saving space.

They are guided angle seat valves operated by a single-acting pneumatic actuator with spring safety protection.

Normally open or normally closed should be selected during use. The product is made of stainless steel casting and PTFE. It can be used in most gas, liquid, steam, and corrosive environments. It has a radiator to protect the actuator, ensuring a long valve life.

The following are the characteristics and technical parameters of Burkert angle seat valves: Burkert angle seat valves are single-acting and double-acting. Working principle: opening and closing are achieved by spring return, divided into normally open and normally closed types.

Double-acting (pneumatic head usually has two orifices); working principle: air supply controls its opening and closing. (Double-acting with spring return can also be selected according to customer requirements for more precise control.) Burkert 2000 type angle seat valves are available in for direct shipping.

Distinguishing genuine Burkert angle seat valves from counterfeits!

Burkert Model 2000 Pneumatic Angle Seat Valve: A Burkert Classic. The Burkert Model 2000 pneumatic angle seat valve is a classic Burkert product that has been widely used in the market for over 20 years. However, cheap imitations of the Model 2000 are increasingly rampant.

Recently, Burkert tested some of these imitations and discovered serious quality problems.

What Makes Me Different:

• Purchase directly from trusted Burkert suppliers, specifically Burkert distributors responsible for sales in various regions, ensuring the most reliable purchasing channel.
• Genuine Burkert angle seat valves have the logo cast on the valve body and a label affixed to the valve head.
• Genuine Burkert Model 2000 valves have a smooth, round viewing window on the top of the valve head for checking the valve's open/closed status;
• newer versions have a knurled finish (as shown in the picture below).
• Each genuine valve should come in a box with the Burkert brand logo.
• Brand new intellectual property, distinctive appearance. I will not tolerate this! Inform distributors in writing informed. Burkert China has informed all distributors in writing how to identify counterfeit products. They have also warned merchants selling counterfeit or substandard products not to take any chances, as they will be held responsible for any serious accidents caused by such products. Burkert has established a professional anti-counterfeiting legal team to pursue legal action against any counterfeit products discovered. "As a company that prides itself on providing products that have undergone rigorous testing and millions of reliable operations, we cannot allow products that look similar to ours but do not meet the same standards or may even pose potential dangers to be misused." They will only cause harm! Inferior sealing materials: Counterfeit products currently on the market pose potential dangers. We have tested some counterfeit products and found that they use lower-performance sealing materials instead of Burkert's high-quality EPDM or PTFE. These counterfeit products cannot be used under the same operating conditions as genuine Burkert 2000 angle seat valves. For example, inferior valve assemblies, when used for steam control at 180°C (as stated in the accompanying technical datasheet), can cause seals in some Burkert-tested imitations to dissolve. The chain reaction is potentially dangerous: the valve may leak, close, or remain partially open, leading to dangerous steam escapes unexpectedly;
• if the steam escapes too quickly, it can cause catastrophic failure of the pipeline or container;
• or pressure may build up in the wrong place. The lifespan of these imitations is significantly reduced compared to genuine Burkert valves, resulting in significantly higher maintenance costs. This is essentially a case of low initial purchase cost leading to substantial long-term losses. Burkert 2000 series angle seat valves, in stock in Shanghai, direct shipping. Burkert, your trusted partner. -------LEHIY Industrial Burkert is your trusted fluid control system supplier with over 70 years of experience in fluid control. Our product range covers solenoid valves, process control valves, automation systems, sensors and controllers, as well as CUT membrane technology, providing complete solutions for the control of various fluids (water, chemicals, gases, steam, etc.). Our professional team Burkert allows to deeply understand industry needs. Burkert has Bürkert Fluid Control Systems (Shanghai) Co., Ltd. is the only German branch in China. We offer Bürkert angle seat valves (model 2000) with direct shipping from Shanghai. We also stock and ship the full range of Bürkert fluid control products, including ATOS hydraulic valves, E+H instruments, ASCO solenoid valves, HYDAC sensors, relays, filters, Aventics solenoid valves, cylinders, Samson positioners, Hirschmann switches, and Fairchild pressure regulating valves.

Share Article