Omron NX1P2 Mechanical Automation Controller
LEHIY item code: LH-OMRON-0010
Quick buying check
This page helps you check Omron NX1P2 Mechanical Automation Controller before you ask for a quote.
Confirm the brand, model number, part number, and quantity. Share a clear nameplate photo when the old item has close variants.
LEHIY can check stock, lead time, packing, shipping documents, and safe replacement options for maintenance orders.
NX Series NX1P2 CPU Unit
| Product Name | Program Capacity | Variable Capacity | Use real-axis upper limit | Built-in Input/Output Total Points | Model | ||||
|---|---|---|---|---|---|---|---|---|---|
| Motion control axis * 1 | Single-axis position control axis * 1 | Enter points | Output points | ||||||
| NX1P2 CPU Unit | 1.5MB | 32kB (power-off hold)/ 2MB (power-off not hold) | 8 Axis | 4-axis | 4-axis | 40 points | 24:00 | 16-point, NPN transistor | NX1P2-1140DT |
| 16-point, PNP transistor * 2 | NX1P2-1140DT1 | ||||||||
| 6 Axis | 2 Axis | 4-axis | 16-point, NPN transistor | NX1P2-1040DT | |||||
| 16-point, PNP transistor * 2 | NX1P2-1040DT1 | ||||||||
| 4-axis | 0 Axis | 4-axis | 24:00 | 14 points | 10 point, NPN transistor | NX1P2-9024DT | |||
| 10 points, PNP transistor * 2 | NX1P2-9024DT1 |
NX Unit
Up to 8 units can be installed on the NX1P2 CPU Unit.Digital input unit
Digital output unit
| Product Name | Specifications | Model | Overseas Standard | ||||
|---|---|---|---|---|---|---|---|
| Enter Points | Relay type | Maximum switching capability | I/O refresh method | ON/OFF response time | |||
| Relay output unit (PUSH-IN fastening terminal block, width 12mm/width 24mm) | 2 points | N.O. | Maximum switching capacity: AC250V/2A(cos φ = 1) AC250V/2A(cos φ = 0.4) DC24V/2A, 4A/cell | Free Run Refresh Method | Less than 15ms/Less than 15ms | NX-OC2633 | UC1, N, L, CE, RCM, KC |
| N.O.+N. C. | NX-OC2733 | UC1, N, CE, RCM, KC | |||||
| 8 points | N.O. | Maximum switching capacity: AC250V/2A(cos φ = 1) AC250V/2A(cos φ = 0.4) DC24V/2A, 8A/unit | Free run refresh method | Below 15ms/Below 15ms | NX-OC4633 | UC1, N, L, CE, EAC, RCM, KC |
Digital input/output mixing unit
| Product Name | Specifications | Model | Overseas Standard | ||||
|---|---|---|---|---|---|---|---|
| Points | Internal I/O Common Line Handling | Rated voltage | I/O refresh method | ON/OFF response time | |||
| DC input/transistor output unit (MIL connector, width 30mm) | Output: 16 points Input: 16 points | Output: NPN Input: NPN/PNP General | Output: DC12 ~ 24V Input: DC24V | Auto-run refresh or input/output synchronous refresh switch | Output: below 0.1ms/below 0.8ms Input: below 20μs/below 400μs | NX-MD6121-5 | UC1, N, L, CE, RCM, KC |
| Output: PNP Input: NPN/PNP General | Output: DC24V Input: DC24V | Output: below 0.5ms/below 1.0ms Input: below 20μs/below 400μs | NX-MD6256-5 | ||||
| DC input/transistor output unit (Fujitsu connector, width 30mm) | Output: 16 points Input: 16 points | Output: NPN Input: NPN/PNP General | Output: DC12 ~ 24V Input: DC24V | Automatic operation refresh or input/output synchronous refresh switch | Output: below 0.1ms/below 0.8ms Input: below 20μs/below 400μs | NX-MD6121-6 |
Analog input unit
| Product Name | Specifications | Model | Overseas Standard | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Enter points | Input range | Resolution | Conversion value, decimal number (0~100%) | Accuracy (25 ℃) | Input method | Conversion time | Input impedance | I/O refresh method | |||
| Voltage input type | 2 points | -10~ +10V | 1/8000 | -4000 ~4000 | ± 0.2% (full scale) | Single-ended | 250 μs/point | More than 1MΩ | Free Run | NX-AD2603 | UC1, N, L, CE, RCM, KC |
| Differential | NX-AD2604 | ||||||||||
| 1/30000 | -15000 ~15000 | ± 0.1% (full scale) | Differential | 10 μs/dot | Free running/input output synchronization | NX-AD2608 | |||||
| 4:00 | 1/8000 | -4000 ~4000 | ± 0.2% (full scale) | Single-ended | 250 μs/point | Free Run | NX-AD3603 | ||||
| Differential | NX-AD3604 | ||||||||||
| 1/30000 | -15000 ~15000 | ± 0.1% (full scale) | Differential | 10 μs/dot | Free running/input output synchronization | NX-AD3608 | |||||
| 8 points | 1/8000 | -4000 ~4000 | ± 0.2% (full scale) | Single-ended | 250 μs/point | Free Run | NX-AD4603 | ||||
| Differential | NX-AD4604 | ||||||||||
| 1/30000 | -15000 ~15000 | ± 0.1% (full scale) | Differential | 10 μs/dot | Free running/input output synchronization | NX-AD4608 | |||||
| Current Input Type | 2 points | 4~ 20mA | 1/8000 | 0~8000 | ± 0.2% (full scale) | Single-ended | 250 μs/point | 250Ω | Free Run | NX-AD2203 | |
| Differential | NX-AD2204 | ||||||||||
| 1/30000 | 0~30000 | ± 0.1% (full scale) | Differential | 10 μs/dot | Free running/input output synchronization | NX-AD2208 | |||||
| 4:00 | 1/8000 | 0~8000 | ± 0.2% (full scale) | Single-ended | 250 μs/point | Free Run | NX-AD3203 | ||||
| Differential | NX-AD3204 | ||||||||||
| 1/30000 | 0~30000 | ± 0.1% (full scale) | Differential | 10 μs/dot | Free running/input output synchronization | NX-AD3208 | |||||
| 8 points | 1/8000 | 0~8000 | ± 0.2% (full scale) | Single-ended | 250 μs/point | 85Ω | Free Run | NX-AD4203 | |||
| Differential | NX-AD4204 | ||||||||||
| 1/30000 | 0~30000 | ± 0.1% (full scale) | Differential | 10 μs/dot | Free running/input output synchronization | NX-AD4208 |
Analog output unit
| Product Name | Specifications | Model | Overseas Standard | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Output points | Output range | Resolution | Output set value, decimal number (0~100%) | Accuracy (25 ℃) | Conversion time | I/O refresh method | |||
| Voltage output type | 2 points | -10~+10V | 1/8000 | -4000 ~4000 | ± 0.3% (full scale) | 250 μs/dot | Free Run | NX-DA2603 | UC1, N, L, CE, RCM, KC |
| 1/30000 | -15000 ~15000 | ± 0.1% (full scale) | 10 μs/dot | Free running/input output synchronization | NX-DA2605 | ||||
| 4:00 | 1/8000 | -4000 ~4000 | ± 0.3% (full scale) | 250 μs/dot | Free Run | NX-DA3603 | |||
| 1/30000 | -15000 ~15000 | ± 0.1% (full scale) | 10 μs/dot | Free running/input output synchronization | NX-DA3605 | ||||
| Current Output Type | 2 points | 4~20mA | 1/8000 | 0~8000 | ± 0.3% (full scale) | 250 μs/dot | Free Run | NX-DA2203 | |
| 1/30000 | 0~30000 | ± 0.1% (full scale) | 10 μs/dot | Free running/input output synchronization | NX-DA2205 | ||||
| 4:00 | 1/8000 | 0~8000 | ± 0.3% (full scale) | 250 μs/dot | Free Run | NX-DA3203 | |||
| 1/30000 | 0~30000 | ± 0.1% (full scale) | 10 μs/dot | Free running/input output synchronization | NX-DA3205 |
Temperature input unit
| Product Name | Specifications | Model | Overseas Standard | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Output points | Input type | Resolution | Standard accuracy (ambient temperature 25 ℃) | Conversion time | I/O refresh method | Terminal block | |||
| Thermocouple Input Type | 2 points | Thermocouple | Below 0.1°C * 1 | Please refer to our website (www.fa.omron.com .cn/) for product information. | 250ms/unit | Free Run Refresh Method | 16 terminals | NX-TS2101 | UC1, N, L, CE, RCM, KC |
| 4 points | 16 terminals × 2 | NX-TS3101 | |||||||
| 2 points | Below 0.01°C | 10ms/unit | 16 terminals | NX-TS2102 | |||||
| 4 points | 16 terminals × 2 | NX-TS3102 | |||||||
| 2 points | Below 0.001°C | 60ms/unit | 16 terminals | NX-TS2104 | |||||
| 4 points | 16 terminals × 2 | NX-TS3104 | |||||||
| Temperature Measuring Resistor Type | 2 points | Temperature measuring resistor (Pt100/ Pt1000, 3-wire type) * 2 | Below 0.1°C * 1 | 250ms/unit | 16 terminals | NX-TS2201 | |||
| 4 points | 16 terminals × 2 | NX-TS3201 | |||||||
| 2 points | Below 0.01°C | 10ms/unit | 16 terminals | NX-TS2202 | |||||
| 4 points | 16 terminals × 2 | NX-TS3202 | |||||||
| 2 points | Below 0.001°C | 60ms/unit | 16 terminals | NX-TS2204 | |||||
| 4 points | 16 terminals × 2 | NX-TS3204 |
Heater disconnection detection unit
| Product Name | Specifications | Model | Overseas Standard | ||||||
|---|---|---|---|---|---|---|---|---|---|
| CT Input | Control Output | ||||||||
| Points | Maximum heater current | Points | Internal I/O Common Line Handling | Maximum load current | Rated voltage | I/O refresh method | |||
| Thermocouple Input Type | 4:00 | AC 50A | 4:00 | NPN | 0.1A/Point 0.4A/Cell | DC12~24V | Free Run Refresh Method | NX-HB3101 | UC1, N, L, CE, RCM, KC |
| PNP | DC24V | NX-HB3201 |
Load sensor input unit
| Product Name | Specifications | Model | Overseas Standard | ||||
|---|---|---|---|---|---|---|---|
| Points | Transition period | I/O refresh method * | Load sensor applied voltage | Input range | |||
| Load sensor input unit | 1 point | 125μs | · Free running refresh mode · Input/output synchronous refresh mode · Task cycle priority refresh mode | DC5V±10% | -5.0~+5.0mV/V | NX-RS1201 | UC1, N, L, CE, RCM, KC |
Position interface incremental encoder input unit
| Product Name | Specifications | Model | Overseas Standard | ||||
|---|---|---|---|---|---|---|---|
| Number of channels | External input number | Maximum response frequency | I/O refresh method | Number of I/O entry mappings | |||
| Incremental Encoder Input Unit | 1(NPN) | 3(NPN) | 500kHz | Auto-run refresh mode, input/output synchronous refresh mode | 1/1 | NX-EC0112 | UC1, N, CE, RCM, KC |
| 1(PNP) | 3(PNP) | NX-EC0122 | UC1, N, L, CE, RCM, KC | ||||
| 1 | 3(NPN) | 4MHz | NX-EC0132 | UC1, N, CE, RCM, KC | |||
| 3(PNP) | NX-EC0142 | UC1, N, L, CE, RCM, KC | |||||
| 2(NPN) | None | 500kHz | 2/2 | NX-EC0212 | UC1, N, CE, RCM, KC | ||
| 2(PNP) | NX-EC0222 | UC1, N, L, CE, RCM, KC |
Position Interface SSI Input Unit
| Product Name | Specifications | Model | Overseas Standard | ||||
|---|---|---|---|---|---|---|---|
| Number of SSI channels | Input/output specifications | Maximum data length | Encoder power supply | Terminal block | |||
| SSI input unit | 1 | RS-422 line driver/receiver | 32-bit | DC24V, 0.3A/CH | Push-in type | NX-ECS112 | UC1, N, L, CE, RCM, KC |
| 2 | RS-422 line driver/receiver | 32-bit | DC24V, 0.3A/CH | Push-in type | NX-ECS212 |
Position interface pulse output unit
| Product Name | Specifications | Model | Overseas Standard | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Number of channels * 1 | External input number | Number of external outputs | Pulse output maximum speed | I/O refresh method | Number of I/O entry mappings | Control output interface | |||
| Pulse Output Unit | 1(NPN) | 2(NPN) | 1(NPN) | 500kpps | Input/output synchronization refresh mode, task cycle priority refresh mode * 2 | 1/1 | Open collector output | NX-PG0112 | UC1, N, CE, RCM, KC |
| 1(PNP) | 2(PNP) | 1(PNP) | NX-PG0122 | UC1, N, L, CE, RCM, KC | |||||
| 2 | 5 points/CH (NPN) | 3 points/CH (NPN) | 4Mpps | 2/2 | Line Drive Output | NX-PG0232-5 | UC1, CE, RCM, KC | ||
| 5 points/CH (PNP) | 3 points/CH (PNP) | NX-PG0242-5 | |||||||
| 4 | 5 points/CH (NPN) | 3 points/CH (NPN) | 4/4 | NX-PG0332-5 | |||||
| 5 points/CH (PNP) | 3 points/CH (PNP) | NX-PG0342-5 |
Communication Interface Unit
| Product name | Serial Interface | External connection terminal | Serial port | Communication function | Model | Overseas standards |
|---|---|---|---|---|---|---|
| Communication Interface Unit | RS-232C | No screw fastening terminal | 1 port | · No Protocol · Serial Line Monitor | NX-CIF101 | UC1, N, L, CE, RCM, KC |
| RS-422A/485 | NX-CIF105 | |||||
| RS-232C | D-Sub connector | 2 ports | NX-CIF210 |
IO-Link master unit
| Product Name | Specifications | Model | Overseas Standard | ||
|---|---|---|---|---|---|
| Number of IO-Link ports | I/O refresh method * | Port connection terminal | |||
| I/O-Link Master Unit | 4 | Free run refresh mode (fixed) | Fastening terminals without screws | NX-ILM400 | UC1, N, L, CE, RCM, KC |
System Unit
| Product name | Specifications | Model | Overseas standards |
|---|---|---|---|
| NX unit power supply additional supply unit | Power supply voltage: DC24V(DC20.4 ~ 28.8V) NX unit power supply capacity: 10W or less | NX-PD1000 | UC1, N, L, CE, RCM, KC |
| I/O Power Supplements Unit | Supply voltage: DC5 ~ 24V(DC4.5 ~ 28.8V) I/O supply maximum current: 4A | NX-PF0630 | UC1, N, L, CE, RCM, KC |
| Supply voltage: DC5 ~ 24V(DC4.5 ~ 28.8V) I/O supply maximum current: 10A * | NX-PF0730 | ||
| I/O Power Connection Unit | Number of IO power terminals: IOG:16 terminals I/O power terminal current capacity: 4A/terminals or less | NX-PC0010 | UC1, N, L, CE, RCM, KC |
| Number of IO power terminals: IOV:16 terminals I/O power terminals Current capacity: 4A/terminals or less | NX-PC0020 | UC1, N, L, CE, RCM, KC | |
| Number of IO power terminals: IOV:8 terminals, IOG:8 terminals I/O power terminal current capacity: 4A/terminals or less | NX-PC0030 | UC1, N, L, CE, RCM, KC | |
| Shielding connection unit | Number of shield terminals: 14 terminals (2 terminals below are functional ground terminals) | NX-TBX01 | UC1, N, L, CE, RCM, KC |
The EtherCAT coupler
can be connected from the built-in EtherCAT port of the NX1P2 CPU unit to the EtherCAT coupler, using the aforementioned NX unit and NX series safety unit.| Product name | Communication cycle | NX unit power consumption | IO power supply maximum current | Model | Overseas standards |
|---|---|---|---|---|---|
| EtherCAT coupler unit * 1 | 250~4000μs *2 | Below 1.45W | 4A | NX-ECC201 | UC1, N, L, CE, KC |
| 250~4000μs *2 | 10A | NX-ECC202 | |||
| 125~10000μs *2 | Below 1.25W | NX-ECC203 |
Secure CPU Unit
| Appearance | Specifications | Model | Overseas Standard | |||
|---|---|---|---|---|---|---|
| Maximum Safe I/O Points | Program capacity | Security master connections | I/O refresh method | Unit version | ||
| 256 point | 512KB | 32 | Free run refresh method | Ver. 1.1 | NX-SL3300 | For more information, please refer to the product information on our website (www.fa.omron.com. cn/). |
| 1024 point | 2048KB | 128 | Free run refresh method | Ver. 1.1 | NX-SL3500 |
Safety input unit
| Appearance | Specifications | Model | Overseas Standard | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Security input points | Test output points | Internal I/O Common End Row Handling | Rated input voltage | Omron special safety input device | Number of secure slave connections | I/O refresh method | Unit version | ||
| 4 points | 2 points | Leaky Input (PNP) | DC24V | Connectable | 1 | Free run refresh method | Ver. 1.1 | NX-SIH400 | For more information, please refer to the product information on our website (www.fa.omron.com. cn/). |
| 8 points | 2 points | Leaky Input (PNP) | DC24V | No connection | 1 | Free run refresh method | Ver. 1.0 | NX-SID800 |
Safety output unit
| Appearance | Specifications | Model | Overseas Standard | |||
|---|---|---|---|---|---|---|
| Security input points | Internal I/O Common End Row Handling | Maximum load current | Rated input voltage | Number of secure slave connections | I/O refresh method | Unit version |
| 2 points |
Plain language sourcing guide for Omron NX1P2 Mechanical Automation Controller
Start with the full model name. Check the brand name. Check the part number. Check the code on the old unit. These small checks help you avoid a wrong order.
Take one clear photo of the front label. Take one photo of the side label. If the part has a cable, plug, port, seal, coil, or screen, take a photo of that area too.
Tell us the quantity you need. Tell us your country. Tell us the date when the plant needs the part. We can then check stock, lead time, safe packing, and the best shipping plan.
If the exact model is no longer made, do not guess. Send the old model and the use case. LEHIY can compare close options and explain which choice is safer for repair work.
Use simple order notes. Write the model in one line. Write the quantity in one line. Write the delivery country in one line. This helps our team reply faster.
Check the old part before removal. Look at the label. Look at the connector. Look at the mounting size. Look at the voltage or pressure rating if it is shown.
Do not rely on a short nickname for a part. Many industrial items have close versions. A small suffix can change the plug, output, range, or software setting.
Ask for a stock check if the plant is stopped. Ask for a lead time if the order is planned. Ask for packing photos if the part is fragile or heavy.
For a replacement order, tell us what failed. Tell us where the part is used. Tell us if an equal model is acceptable. This makes the first answer more useful.
For repeat orders, send the last invoice, old label, or old packing photo. The same reference can help us match the correct product again.
For urgent service, keep the message simple. One model, one quantity, one photo, and one delivery target are enough for a fast first check.
Share Article
| Brand Name: | Omron | Certification: | ISO9001, CE |
|---|---|---|---|
| Place of Origin: | China | Condition: | New |
| Warranty: | 1 year | Customized sourcing: | available |
What are your strengths?
Ans. LEHIY specializes in industrial automation and control components, offering fast sourcing, stable quality, and competitive prices for global customers.
What is your estimated delivery time?
Ans. Most items ship within 3-7 days. Customized or rare models may take 10-30 working days.
What are your primary product offerings?
Ans. Our main products include PLCs, sensors, valves, solenoid valves, actuators, power modules, transmitters, and complete industrial automation solutions.
How can I get in touch with you?
Ans. You can reach us anytime via Email, WhatsApp, LinkedIn, or our contact page. Our sales engineers respond quickly and provide technical support when needed.
What are your payment terms?
Ans. Standard terms are 50% TT in advance and 50% balance before delivery. We also support Alibaba Trade Assurance and L/C for qualified orders.
Feel free to Ask questions
Replacement support
Omron NX1P2 Mechanical Automation Controller
Send the brand, model, part number, quantity, nameplate photos, and application requirements. LEHIY will check availability, suitable alternatives, packing details, and delivery options before quoting.
For discontinued, temporarily unavailable, or configuration-sensitive items, our team can compare the requested model with close variants or compatible replacements for maintenance and spare parts planning.
Use this page as a practical sourcing note for engineers, buyers, and maintenance teams comparing automation components. Check the model name, brand, LEHIY code, application, and replacement requirements before sending an inquiry.
Short, clear information helps our team confirm availability faster and reduce back-and-forth communication during urgent maintenance projects.
- Confirm the complete model number and any suffix printed on the nameplate.
- Share quantity, destination country, preferred shipping method, and target delivery date.
- Include photos, drawings, old purchase records, or datasheets when compatible alternatives are acceptable.
- Ask for stock checking, replacement comparison, packing details, and export documentation before ordering.
Useful details for a faster quote
- Complete model and part number
- Required quantity and target delivery date
- Nameplate photos, drawings, or old purchase records
- Voltage, signal range, dimensions, or accessory needs
Model matching
We review brand, model, part number, nameplate photos, installation environment, and replacement requirements.
Quality and delivery
Each order can be checked for authenticity, condition, packing, warranty, shipping method, and delivery schedule.
Stock alternatives
For urgent maintenance projects, we can help check stock, compatible alternatives, and fast international shipment.
Omron NX1P2 Mechanical Automation Controller verification notes
Please send the full model number, quantity, target delivery date, and nameplate photos. These details help us check the requested product or a close replacement.
LEHIY reviews product name, part number, series, label information, and application requirements before shipment.
If the original model is discontinued or supplied with different accessories, we can explain practical differences before quoting.
For repeat purchasing, we can help organize related models, replacement parts, shipment schedules, and clear communication for your team.
Related Products
Helpful links
Explore More
Trusted partners
We have collaborated with many well-known enterprises, contributing to their success and establishing a strong reputation as a trusted partner in the industry.
