Mitsubishi Electric power module, Q62P
LEHIY item code: LH-1248
Input Voltage Distortion Rate: Within 5%
Category: Power Module
Rated Current (A): 3A/DC5V;0.6A/DC24V
Quick buying check
This page helps you check Mitsubishi Electric power module, Q62P before you ask for a quote.
Confirm the brand, model number, part number, and quantity. Share a clear nameplate photo when the old item has close variants.
LEHIY can check stock, lead time, packing, shipping documents, and safe replacement options for maintenance orders.
Product Overview
| The power module provides DC 5V power to the various modules of the programmable controller mounted on the base plate |
Technical Specifications
Power module mounting slot
Applicable substrates
Q3□B, Q3□DB, Q6□B
Input power supply
AC100~240V
(AC85~264V)
Input frequency
50/60HZ±5%
Between Total Input • LG and Total Output • FG, between Total Input and LG, and between Total Output and FG, the insulation resistance measured by a DC 500V insulation resistance meter must be above 10MΩ.
Noise Immunity
•Using a noise simulator with a noise voltage of 1500Vp-p, a noise width of 1μs, and a noise frequency of 25~60Hz.
•Noise voltage IEC61000-4-4, 2kV.
Running Display
LED Display (Normal: Green light; Abnormal: Off light)
Project | Functional Specifications | ||
Q61P | Q62P | ||
Substrate mounting location | |||
Input Voltage Distortion Rate | Within 5% | ||
Maximum Apparent Input Power | 120VA | 105VA | |
Maximum Input Power | — | ||
Inrush Current | 20A within 8ms | ||
Rated Output Current | DC5V | 6A | 3A |
DC24V | — | 0.6A | |
External Output Voltage | — | ||
Overcurrent Protection | DC5V | 6.6A and above | 3.3A and above |
DC24V | — | 0.66A and above | |
Overvoltage protection | DC5V | 5.5~6.5V | |
DC24V | — | ||
Efficiency | Above 70% | Above 65% | |
Allowable Instantaneous Stop Time | Within 20ms | ||
Withstand Voltage | Total Input • LG - Total Output • FG between AC2830Vrms/3 cycles (elevation 2000m) | ||
Insulation Resistance | |||
Fuse | Internal Fuse (Cannot be replaced by user) | ||
Contact Output Section | Application | ERR. Contact | |
Rated Switching Voltage and Current | DC24V, 0.5A | ||
Minimum Switching Load | DC5V,1mA | ||
Response Time | OFF-ON: Less than 10ms ON-OFF: Less than 12ms | ||
Lifespan | Mechanical: Over 20 million cycles; Electrical: Over 100,000 cycles at rated switching voltage and current | ||
Surge Suppressor | None | ||
Fuse | None | ||
Terminal bolt size | M3.5 bolt | ||
Suitable wire size | 0.75~2 square millimeters | ||
Applicable to press-fit terminals | RAV1.25-3.5, RAV2-3.5 | ||
Applicable torque | 0.66~0.89N•m | ||
Dimensions | H | 98mm | |
W | 55.2mm | ||
D | 90mm | ||
Weight | 0.40kg | 0.39kg |
Product Details
NO. | Name | Purpose |
1 | “POWER”LED*2 | Light on (Green): Normal (DC5V output, momentary stop within 20ms) Light off: ·AC power is ON, but the power module has malfunctioned. (DC5V abnormality, overload, internal circuit failure, fuse blown)·No AC power input ·Power outage (including momentary stops longer than 20ms) |
2 | “POWER”LED | On (green): Normal (DC5V output, momentary stop within 10ms) Off: ·DC power is ON, but the power module has failed. (DC5V abnormality, overload, internal circuit failure, fuse blown)·No DC power input ·Power outage (including momentary stops longer than 10ms) |
3 | “LIFE”LED | On (Green): When starting to use On (Orange): Module remaining lifespan approximately 50% Blinking (Orange): ·5 seconds on → 1 second off: Module remaining lifespan approximately 1 year ·0.5 second interval: Module remaining lifespan approximately 6 months Off: ·Reached the end of the module's lifespan ·Out of ambient temperature range (Module ambient temperature is above the specified value, and the lifespan detection function stops) On (Red): Out of ambient temperature range ( (When the module ambient temperature is above the specified value) Blinking (red): Functional malfunction (1-second interval) |
4 | ERR. Terminal | ·ON when the entire system is running normally. ·OFF (open circuit) when no power is input, when a CPU module stop-type error occurs (including reset), or when the fuse blows. ·OFF in a multi-CPU system configuration when a stop-type error occurs in any CPU module. Always OFF when mounted on an expansion board. |
5 | LIFE OUT Terminal | ·When the remaining lifespan is detected (less than 1 year), it becomes OFF (open circuit). ·When a lifespan diagnostic abnormality (including detection and processing abnormality) is detected, it becomes flickering OFF (open circuit). *1 ·When the ambient temperature range is exceeded, it becomes flickering OFF (open circuit). ·When the internal watchdog timer of the module is detected to be abnormal, it becomes OFF (open circuit). The above four actions may also occur when mounted on an expansion board. |
6 | FG Terminal | Ground terminal connected to the shielded part on the printed circuit board. |
7 | LG Terminal | Grounding of the power filter. With AC input, it has a potential of 1/2 of the input voltage. |
8 | +24V, 24G Terminal | Provides power to modules that require DC24V internal power (provided to the module via external wiring). |
9 | Terminal Bolt | M3.5 × 7 Bolt |
10 | Terminal Cover | Protective Cover for Terminal Block |
11 | Module Mounting Bolt Holes | Screw holes used to mount modules to the substrate. | M3 × 12 Bolts (User Supplied) (Tightening Torque Range: 0.36 ～ 0.48 N·m)
12 | Module Mounting Rod | Used when mounting the module onto the base plate. |
13 | Power Input Terminal | This is the power input terminal for Q61P-A1, connecting to AC100V AC power. |
14 | Power Input Terminal | This is the power input terminal for Q61P-A2, connecting to AC 200V AC power. |
15 | Power Input Terminal | This is the power input terminal for Q61P, Q61P-D, Q61SP, Q62P, and Q64PN, connecting to AC 100V to AC 200V AC power. |
16 | Power Input Terminal | This is the power input terminal for Q63P, connecting to a DC 24V power supply. |
17 | Power Input Terminal | This is the power input terminal for Q64P, connecting to an AC 100V/AC 200V power supply. |
*1. The so-called flashing OFF means repeating OFF and ON three times at 1-second intervals before entering the OFF (open circuit) state. *2. When using Q61P-D in a system with an extension board, the POWER LED of Q61P-D on the extension board will turn dark red when the power is OFF, but there is no abnormality. |
Technical Specifications
| Specification | Value |
|---|---|
| Brand | Mitsubishi Electric |
| Power Supply Voltage (V) | AC100~240V |
| Rated Current (A) | 3A/DC5V;0.6A/DC24V |
| Category | Power Module |
Plain language sourcing guide for Mitsubishi Electric power module, Q62P
Start with the full model name. Check the brand name. Check the part number. Check the code on the old unit. These small checks help you avoid a wrong order.
Take one clear photo of the front label. Take one photo of the side label. If the part has a cable, plug, port, seal, coil, or screen, take a photo of that area too.
Tell us the quantity you need. Tell us your country. Tell us the date when the plant needs the part. We can then check stock, lead time, safe packing, and the best shipping plan.
If the exact model is no longer made, do not guess. Send the old model and the use case. LEHIY can compare close options and explain which choice is safer for repair work.
Use simple order notes. Write the model in one line. Write the quantity in one line. Write the delivery country in one line. This helps our team reply faster.
Check the old part before removal. Look at the label. Look at the connector. Look at the mounting size. Look at the voltage or pressure rating if it is shown.
Do not rely on a short nickname for a part. Many industrial items have close versions. A small suffix can change the plug, output, range, or software setting.
Ask for a stock check if the plant is stopped. Ask for a lead time if the order is planned. Ask for packing photos if the part is fragile or heavy.
For a replacement order, tell us what failed. Tell us where the part is used. Tell us if an equal model is acceptable. This makes the first answer more useful.
For repeat orders, send the last invoice, old label, or old packing photo. The same reference can help us match the correct product again.
For urgent service, keep the message simple. One model, one quantity, one photo, and one delivery target are enough for a fast first check.
Share Article
| Brand Name: | Mitsubishi | Certification: | ISO9001, CE |
|---|---|---|---|
| Place of Origin: | China | Condition: | New |
| Warranty: | 1 year | Customized sourcing: | available |
What are your strengths?
Ans. LEHIY specializes in industrial automation and control components, offering fast sourcing, stable quality, and competitive prices for global customers.
What is your estimated delivery time?
Ans. Most items ship within 3-7 days. Customized or rare models may take 10-30 working days.
What are your primary product offerings?
Ans. Our main products include PLCs, sensors, valves, solenoid valves, actuators, power modules, transmitters, and complete industrial automation solutions.
How can I get in touch with you?
Ans. You can reach us anytime via Email, WhatsApp, LinkedIn, or our contact page. Our sales engineers respond quickly and provide technical support when needed.
What are your payment terms?
Ans. Standard terms are 50% TT in advance and 50% balance before delivery. We also support Alibaba Trade Assurance and L/C for qualified orders.
Feel free to Ask questions
Replacement support
Mitsubishi Electric power module, Q62P
Send the brand, model, part number, quantity, nameplate photos, and application requirements. LEHIY will check availability, suitable alternatives, packing details, and delivery options before quoting.
For discontinued, temporarily unavailable, or configuration-sensitive items, our team can compare the requested model with close variants or compatible replacements for maintenance and spare parts planning.
Use this page as a practical sourcing note for engineers, buyers, and maintenance teams comparing automation components. Check the model name, brand, LEHIY code, application, and replacement requirements before sending an inquiry.
Short, clear information helps our team confirm availability faster and reduce back-and-forth communication during urgent maintenance projects.
- Confirm the complete model number and any suffix printed on the nameplate.
- Share quantity, destination country, preferred shipping method, and target delivery date.
- Include photos, drawings, old purchase records, or datasheets when compatible alternatives are acceptable.
- Ask for stock checking, replacement comparison, packing details, and export documentation before ordering.
Useful details for a faster quote
- Complete model and part number
- Required quantity and target delivery date
- Nameplate photos, drawings, or old purchase records
- Voltage, signal range, dimensions, or accessory needs
Model matching
We review brand, model, part number, nameplate photos, installation environment, and replacement requirements.
Quality and delivery
Each order can be checked for authenticity, condition, packing, warranty, shipping method, and delivery schedule.
Stock alternatives
For urgent maintenance projects, we can help check stock, compatible alternatives, and fast international shipment.
Mitsubishi Electric power module, Q62P verification notes
Please send the full model number, quantity, target delivery date, and nameplate photos. These details help us check the requested product or a close replacement.
LEHIY reviews product name, part number, series, label information, and application requirements before shipment.
If the original model is discontinued or supplied with different accessories, we can explain practical differences before quoting.
For repeat purchasing, we can help organize related models, replacement parts, shipment schedules, and clear communication for your team.
Related Products
Helpful links
Explore More
Product family
More In This Category
Trusted partners
We have collaborated with many well-known enterprises, contributing to their success and establishing a strong reputation as a trusted partner in the industry.
