FX5-16EYT/ESS

1. technical parameters

FX5-16EYT/ESS is an extended output module of Mitsubishi PLC iQ-F FX5 series. The following are the main technical parameters of the module:

1. Output specifications :

• Output points :16 points

• Output connection method : terminal block (M3 screw)

• Output type : transistor drain type

• External power supply :DC5 ~ 30V

• Loop insulation : Mechanical insulation

• Action : LED lights up when input ON

• Maximum load :0.5A/1 point

• Open circuit leakage current :0.1mA/DC30V

• Input response time :OFF-& gt;ON, ON-& gt;OFF less than 0.2ms/200mA(DC24V)

• ON voltage :1.5V or less

1. Power Specifications :

• Rated voltage :DC5V (unit internal power supply), DC24V (unit internal power supply)

• Current consumption :100mA(DC5V), 125mA(DC24V)

1. Other specifications :

• Applicable CPU units :FX5U, FX5UC CPU units, FX5UC CPU units need to be FX5-CNV-IFC when used

• weight : about 0.2kg

2. Usage

1. Installation and connection :

• Installation environment : Ensure that the module is installed in an environment without strong electromagnetic interference, severe vibration, excessive dust and corrosive gases.

• Power connection : Connect the DC5V and DC24V power supplies to the designated terminals of the module to ensure the correct polarity.

• Output connection : According to actual needs, connect external equipment to the output terminal of the module, pay attention to the connection method and voltage range.

1. Programming and configuration :

• CPU unit selection : Make sure that the CPU unit used is compatible with the FX5-16EYT/ESS, such as FX5U and FX5UC. When using the FX5UC, you need to configure the FX5-CNV-IFC interface module.

• programming software : Use Mitsubishi-specific programming software (such as GX Works2) for programming, and control the state of the output point through LD, LDI, OUT and other instructions.

• Parameter setting : Depending on the specific application scenario, it may be necessary to adjust parameters such as input response time and digital filter.

1. Operation and monitoring :

• LED indicator : The LED light on the module can display the status of input and output, which is convenient for real-time monitoring.

• fault diagnosis : If there is an abnormality, you can diagnose the fault through the programming software or the indicator light on the module to troubleshoot the problem in time.

1. Maintenance :

• Regular inspection : Regularly check the wiring, power supply and output status of the module to ensure that the module is working normally.

• Cleaning and maintenance : Keep the surface of the module clean to avoid dust and dirt accumulation affecting heat dissipation and insulation performance.

• Back up data : Back up PLC programs and data regularly to prevent accidental loss.

3. Application Case

FX5-16EYT/ESS is widely used in various industrial automation systems. The following are several typical application cases:

1. Packaging Machinery : Automate the packaging process by controlling multiple actuators.

2. Printing Machinery : Control the various parts of the printing equipment to ensure printing accuracy and efficiency.

3. Injection molding machinery : In the injection molding process, control heating, injection, holding pressure and other links to improve production quality and efficiency.

4. Motor winding equipment : Control the operation of the winding machine and realize automatic winding.

Through the rational configuration and use of FX5-16EYT/ESS Mitsubishi PLC output modules, the performance and reliability of industrial automation systems can be significantly improved to meet various complex application requirements.

FX5-16EYT/ESS, Mitsubishi FX5-16EYT/ESS, Output Module FX5-16EYT/ESS,FX5-16EYT/ESS Price

Plain language sourcing guide for FX5-16EYT/ESS

Start with the full model name. Check the brand name. Check the part number. Check the code on the old unit. These small checks help you avoid a wrong order.

Take one clear photo of the front label. Take one photo of the side label. If the part has a cable, plug, port, seal, coil, or screen, take a photo of that area too.

Tell us the quantity you need. Tell us your country. Tell us the date when the plant needs the part. We can then check stock, lead time, safe packing, and the best shipping plan.

If the exact model is no longer made, do not guess. Send the old model and the use case. LEHIY can compare close options and explain which choice is safer for repair work.

Use simple order notes. Write the model in one line. Write the quantity in one line. Write the delivery country in one line. This helps our team reply faster.

Check the old part before removal. Look at the label. Look at the connector. Look at the mounting size. Look at the voltage or pressure rating if it is shown.

Do not rely on a short nickname for a part. Many industrial items have close versions. A small suffix can change the plug, output, range, or software setting.

Ask for a stock check if the plant is stopped. Ask for a lead time if the order is planned. Ask for packing photos if the part is fragile or heavy.

For a replacement order, tell us what failed. Tell us where the part is used. Tell us if an equal model is acceptable. This makes the first answer more useful.

For repeat orders, send the last invoice, old label, or old packing photo. The same reference can help us match the correct product again.

For urgent service, keep the message simple. One model, one quantity, one photo, and one delivery target are enough for a fast first check.