VIBROSYS™ sensor VSM-PCS302 for hydroelectric applications (Canada)

The VIBROSYSTM VSM-PCS302 sensor from Canada is supplied to Yunnan Datang Power Plant. This VibroSystM capacitive proximity probe, VSM-PCS302, features a built-in signal conditioner, a measurement range of 0.3 to 2.3 mm, and comes with a VSM-M12FSSC connector.

This VIBROSYSTM VSM-PCS302 sensor was used at the Tingzikou Hydropower Station on the Jialing River in Tangshan and the Yunnan Datang Golan Tan Hydropower Plant. Our company is an authorized distributor of VIBROSYSTM sensors in Canada; please purchase with confidence.

We can provide import customs declarations, product certificates, quality certificates, and other documents for VIBROSYSTM sensors. We offer fast customs clearance and direct shipping from the original VIBROSYSTM factory in Canada! VIBROSYS™ sensor probe VSM-PCS302 (0.3-2.3 mm) with built-in signal conditioner.

VSM-M12FSSC M12 with matching linear connector (fem.type.shielded).

VIBROSYS™ sensor VSM-PCS302 general specifications: VibroSystM capacitive proximity probe with built-in signal conditioner PCS-302 (0.3-2.3 mm). Measurement type: non-contact proximity, capacitive technology. Measurement range: 0.3 to 2.3 mm [11.8 to 90.6 mils]. Output: 4 to 20 mA.

Sensitivity: 8 mA/mm [0.2 mA/mil]. Accuracy: ±1.25% FSR (calculated over full scale).

Repeatability: ±0.5% FSR (calculated over full scale). Bandwidth: 0 to 1000 Hz (-3 dB). Current output load: up to 500 Ω.

Temperature drift <500 ppm /°C (intermediate range) Voltage 24 Vdc±15% Maximum power consumption 70 mA Connector type 4-pin M12 male cable length 300 meters [984 feet] VIBROSYS™ sensor VSM-PCS302 for hydropower plants.

This project is based on the application of mature generator stator temperature monitoring technology from VibroSystM Corporation of Canada in large-scale hydropower plants in China; it adopts the IEC61850-MIMS/IEC61970 WebService network communication standard for data transmission and sharing; it forms a unified information platform for monitoring the.

status of power equipment and generating equipment; it is the first domestic system to fully realize the online monitoring and comprehensive analysis of unit status parameters such as unit vibration, sway, pressure pulsation, generator air gap, magnetic flux, generator partial discharge, stator core temperature, stator bar end vibration, turbine cavitation,.

energy efficiency, air supply monitoring, environmental noise, and operating conditions.

The Canadian VIBROSYS™ sensor is a process instrument (integrated sensor) that indirectly measures ion concentration by measuring the conductivity of a solution. It can continuously monitor the conductivity of aqueous solutions in industrial processes online.

Because electrolyte solutions are good conductors of electricity, like metallic conductors, current flowing through them necessarily creates resistance, obeying Ohm's law. However, the temperature resistance characteristic of liquids is opposite to that of metallic conductors, exhibiting a negative temperature characteristic.

To distinguish it from metallic conductors, the conductivity of electrolyte solutions is expressed as conductivity (the reciprocal of resistance) or conductivity (the reciprocal of resistivity).

When two mutually insulated electrodes form a conductivity cell, if the solution to be measured is placed between them and a constant voltage alternating current is applied, a current loop is formed.

If the voltage and electrode dimensions are fixed, a certain functional relationship exists between the loop current and the conductivity.

Thus, by measuring the current flowing through the solution to be measured, the conductivity of the solution can be determined. The structure and circuit of the conductivity sensor are the same as those of acid, alkali, and salt concentration sensors.

Share Article