ABB Ontrac series electric actuator, MME812/387 adjustable type, multi-turn torque 60-150NM, 380V/220V
LEHIY item code: LH-ABB-1230
. Simple and efficient human-machine interface and non-intrusive design make on-site installation and commissioning exceptionally easy. Reliable circuit design and simple mechanical structure result in an ultra-long service life.. **Product Features**.
**Adopting advanced ABB frequency conversion drive technology, it achieves flexible start and stop, completely eliminating the "water hammer effect."**. **Speed and torque are independently adjustable in both directions, and the ultra-wide adjustment range significantly reduces user costs.**. **Technical Specifications**. **1.
Power Supply: ** Three-phase three-wire system: 220/380/460/55V±10%, 50/60Hz±5% Single-phase two-wire system: 110/220V±10%, 50/60Hz±5%. 2.
Operating modes: 1) Switching MOE products: Continuous operation, S2-15min 2) Regulating MME products: Continuous operation, S4-25%, number of on-times ≤1200/hour. 3. Motor control: Frequency conversion control. 4. Internal power supply: 24V.DC, maximum 40mA, with short-circuit protection function. 5.
External power supply: 24V.DC (18～33V), maximum 500mA. 6. Input signals: 1) Analog: 4～20mA.DC, input impedance 250Ω, rise characteristic 2) Switching: Pulse width ≥50ms, digital 0 is -3～+5V or open circuit, digital 1 is +12～+35V 3). 7.
Output Signals: 1) Analog: 4-20mA DC, load impedance ≤750Ω, temperature effect ≤0.1%/10K, rise characteristic (default) 2) Switch: 4 basic passive contacts, selectable up to 7 or 8 (all output contacts are configurable), contact capacity 30V DC, 1A or 125V AC, 0.5A, 4 basic passive contacts can.
also be selected as 250V AC, 8A specification 3) Profibus-DP or MODBUS.
8. Travel Range: Minimum number of revolutions for multi-turn products is 1 revolution, maximum number of revolutions is unlimited. 9. Setting Torque: 40%-100% adjustable, step distance 5%. 10. Setting Speed: 40%-100% adjustable, step distance. 11.
Basic Error: 1) Multi-turn electric actuator (stroke ≥ 1 revolution) ≤ ±0.5% 2) Angular stroke electric actuator 3) Linear stroke electric actuator (stroke ≥ 25mm) ≤ ±0.5%. 12. Control Dead Zone: 0.5% (0.5～10% adjustable). 13.
Mid-course Limit: 1) Open limit setting range: 55%~100% 2) Close limit setting range: 0%~45%. 14. Protection Rating: IP67 (IP68 optional). 15. Explosion-proof Rating: Exd Ⅱ CT4 optional. 16.
Environmental Conditions: 1) Ambient Temperature: Switching type MOE: -25℃～+70℃; Regulating type MME: -25℃～+60℃; Split-type transmission part: -40℃～+85℃ 2) Relative humidity: ≤95% 3) Air medium: No highly corrosive, flammable, or explosive gases in the surrounding air.. 17.
Dehumidifier heater: The product has a dedicated heating element; generally, no special supply is required.. 18.
CE electrical regulations: 1) EN 61000-6-4: 2007, EN 61000-6-2: 2005 2) EN 61000-3-2:2006 +A1: 2009+A2: 2009, EN 61000-3-3: 2008 3) EN 60204-1:2006+A1:2009. 19. Installation direction: Any direction.. 20.
Vibration resistance: 5～200Hz within a 0.75g sine wave or 5～ 150Hz 2g Sine Wave (Split Type: Acceleration 3g: X-28.97Hz, Y-96.68Hz, Z-149.6Hz).
Note: If you have other technical requirements, please contact us and we will do our best to meet your needs.
Category: Electric Actuators
Quick buying check
This page helps you check ABB Ontrac series electric actuator, MME812/387 adjustable type, multi-turn torque 60-150NM, 380V/220V before you ask for a quote.
Confirm the brand, model number, part number, and quantity. Share a clear nameplate photo when the old item has close variants.
LEHIY can check stock, lead time, packing, shipping documents, and safe replacement options for maintenance orders.
Product Introduction Overview
MME Series Actuators Selection Difficulty and Spare Parts Cost • Flexible control mode selection, enabling both bus control and analog/digital control, adaptable to various complex retrofit projects with special requirements • Thorough anti-interference and shock protection design of the electrical components ensures extremely stable product operation and effectively eliminates "grid pollution" problems • Ultra-high positioning accuracy, achieving 1% positioning accuracy even in a full stroke (multiple rotations) of 1 revolution • Extensive monitoring and self-diagnostic functions help users quickly and accurately determine the operating status of actuators and even valves • Comprehensive safety protection functions effectively prevent on-site misoperation or minimize harm in case of system emergency failures . Simple and efficient human-machine interface and non-intrusive design make on-site installation and commissioning exceptionally easy. Reliable circuit design and simple mechanical structure result in an ultra-long service life.. **Product Features**. **Adopting advanced ABB frequency conversion drive technology, it achieves flexible start and stop, completely eliminating the "water hammer effect."**. **Speed and torque are independently adjustable in both directions, and the ultra-wide adjustment range significantly reduces user costs.**. **Technical Specifications**. **1. Power Supply:** Three-phase three-wire system: 220/380/460/55V±10%, 50/60Hz±5% Single-phase two-wire system: 110/220V±10%, 50/60Hz±5%. 2. Operating modes: 1) Switching MOE products: Continuous operation, S2-15min 2) Regulating MME products: Continuous operation, S4-25%, number of on-times ≤1200/hour. 3. Motor control: Frequency conversion control. 4. Internal power supply: 24V.DC, maximum 40mA, with short-circuit protection function. 5. External power supply: 24V.DC (18～33V), maximum 500mA. 6. Input signals: 1) Analog: 4～20mA.DC, input impedance 250Ω, rise characteristic 2) Switching: Pulse width ≥50ms, digital 0 is -3～+5V or open circuit, digital 1 is +12～+35V 3). 7. Output Signals: 1) Analog: 4-20mA DC, load impedance ≤750Ω, temperature effect ≤0.1%/10K, rise characteristic (default) 2) Switch: 4 basic passive contacts, selectable up to 7 or 8 (all output contacts are configurable), contact capacity 30V DC, 1A or 125V AC, 0.5A, 4 basic passive contacts can. also be selected as 250V AC, 8A specification 3) Profibus-DP or MODBUS. 8. Travel Range: Minimum number of revolutions for multi-turn products is 1 revolution, maximum number of revolutions is unlimited. 9. Setting Torque: 40%-100% adjustable, step distance 5%. 10. Setting Speed: 40%-100% adjustable, step distance. 11. Basic Error: 1) Multi-turn electric actuator (stroke ≥ 1 revolution) ≤ ±0.5% 2) Angular stroke electric actuator 3) Linear stroke electric actuator (stroke ≥ 25mm) ≤ ±0.5%. 12. Control Dead Zone: 0.5% (0.5～10% adjustable). 13. Mid-course Limit: 1) Open limit setting range: 55%~100% 2) Close limit setting range: 0%~45%. 14. Protection Rating: IP67 (IP68 optional). 15. Explosion-proof Rating: Exd Ⅱ CT4 optional. 16. Environmental Conditions: 1) Ambient Temperature: Switching type MOE: -25℃～+70℃; Regulating type MME: -25℃～+60℃; Split-type transmission part: -40℃～+85℃ 2) Relative humidity: ≤95% 3) Air medium: No highly corrosive, flammable, or explosive gases in the surrounding air.. 17. Dehumidifier heater: The product has a dedicated heating element; generally, no special supply is required.. 18. CE electrical regulations: 1) EN 61000-6-4: 2007, EN 61000-6-2: 2005 2) EN 61000-3-2:2006 +A1: 2009+A2: 2009, EN 61000-3-3: 2008 3) EN 60204-1:2006+A1:2009. 19. Installation direction: Any direction.. 20. Vibration resistance: 5～200Hz within a 0.75g sine wave or 5～ 150Hz 2g Sine Wave (Split Type: Acceleration 3g: X-28.97Hz, Y-96.68Hz, Z-149.6Hz). Note: If you have other technical requirements, please contact us and we will do our best to meet your needs. |
Technical Specifications
| Specification | Value |
|---|---|
| Brand | ABB |
| Category | Electric Actuators |
Plain language sourcing guide for ABB Ontrac series electric actuator, MME812/387 adjustable type, multi-turn torque 60-150NM, 380V/220V
Start with the full model name. Check the brand name. Check the part number. Check the code on the old unit. These small checks help you avoid a wrong order.
Take one clear photo of the front label. Take one photo of the side label. If the part has a cable, plug, port, seal, coil, or screen, take a photo of that area too.
Tell us the quantity you need. Tell us your country. Tell us the date when the plant needs the part. We can then check stock, lead time, safe packing, and the best shipping plan.
If the exact model is no longer made, do not guess. Send the old model and the use case. LEHIY can compare close options and explain which choice is safer for repair work.
Use simple order notes. Write the model in one line. Write the quantity in one line. Write the delivery country in one line. This helps our team reply faster.
Check the old part before removal. Look at the label. Look at the connector. Look at the mounting size. Look at the voltage or pressure rating if it is shown.
Do not rely on a short nickname for a part. Many industrial items have close versions. A small suffix can change the plug, output, range, or software setting.
Ask for a stock check if the plant is stopped. Ask for a lead time if the order is planned. Ask for packing photos if the part is fragile or heavy.
For a replacement order, tell us what failed. Tell us where the part is used. Tell us if an equal model is acceptable. This makes the first answer more useful.
For repeat orders, send the last invoice, old label, or old packing photo. The same reference can help us match the correct product again.
For urgent service, keep the message simple. One model, one quantity, one photo, and one delivery target are enough for a fast first check.
Share Article
| Brand Name: | ABB | Certification: | ISO9001, CE |
|---|---|---|---|
| Place of Origin: | China | Condition: | New |
| Warranty: | 1 year | Customized sourcing: | available |
What are your strengths?
Ans. LEHIY specializes in industrial automation and control components, offering fast sourcing, stable quality, and competitive prices for global customers.
What is your estimated delivery time?
Ans. Most items ship within 3-7 days. Customized or rare models may take 10-30 working days.
What are your primary product offerings?
Ans. Our main products include PLCs, sensors, valves, solenoid valves, actuators, power modules, transmitters, and complete industrial automation solutions.
How can I get in touch with you?
Ans. You can reach us anytime via Email, WhatsApp, LinkedIn, or our contact page. Our sales engineers respond quickly and provide technical support when needed.
What are your payment terms?
Ans. Standard terms are 50% TT in advance and 50% balance before delivery. We also support Alibaba Trade Assurance and L/C for qualified orders.
Feel free to Ask questions
Replacement support
ABB Ontrac series electric actuator, MME812/387 adjustable type, multi-turn torque 60-150NM, 380V/220V
Send the brand, model, part number, quantity, nameplate photos, and application requirements. LEHIY will check availability, suitable alternatives, packing details, and delivery options before quoting.
For discontinued, temporarily unavailable, or configuration-sensitive items, our team can compare the requested model with close variants or compatible replacements for maintenance and spare parts planning.
Use this page as a practical sourcing note for engineers, buyers, and maintenance teams comparing automation components. Check the model name, brand, LEHIY code, application, and replacement requirements before sending an inquiry.
Short, clear information helps our team confirm availability faster and reduce back-and-forth communication during urgent maintenance projects.
- Confirm the complete model number and any suffix printed on the nameplate.
- Share quantity, destination country, preferred shipping method, and target delivery date.
- Include photos, drawings, old purchase records, or datasheets when compatible alternatives are acceptable.
- Ask for stock checking, replacement comparison, packing details, and export documentation before ordering.
Useful details for a faster quote
- Complete model and part number
- Required quantity and target delivery date
- Nameplate photos, drawings, or old purchase records
- Voltage, signal range, dimensions, or accessory needs
Model matching
We review brand, model, part number, nameplate photos, installation environment, and replacement requirements.
Quality and delivery
Each order can be checked for authenticity, condition, packing, warranty, shipping method, and delivery schedule.
Stock alternatives
For urgent maintenance projects, we can help check stock, compatible alternatives, and fast international shipment.
ABB Ontrac series electric actuator, MME812/387 adjustable type, multi-turn torque 60-150NM, 380V/220V verification notes
Please send the full model number, quantity, target delivery date, and nameplate photos. These details help us check the requested product or a close replacement.
LEHIY reviews product name, part number, series, label information, and application requirements before shipment.
If the original model is discontinued or supplied with different accessories, we can explain practical differences before quoting.
For repeat purchasing, we can help organize related models, replacement parts, shipment schedules, and clear communication for your team.
Helpful links
Explore More
Product family
More In This Category
Trusted partners
We have collaborated with many well-known enterprises, contributing to their success and establishing a strong reputation as a trusted partner in the industry.
